4"X 50' Pipe Joint Wrapping Tape

Pipe Joint Tape Description

Surface to which it shall be applied must be clean and dry. All rust adhered materials must be cleaned off the surface. Metallic etc.

surfaces must be cleaned by using a proper solvent. Adhesive Primer undercoat must be applied to steel pipe until the surface dries out.

Pipe Joint Tape knows as Pipe Wrap Tape,Cold Applied Tape,Butyl Pipeline Tape

Product Properties	Test method	Typical Value	Typical Value
		GF300-35	GF0-50
Tensile Strength	ASTM D1000	40 N/cm	50N/cm
Elongation	ASTM D1000	300%	350%
Peel Adhesion to Primed Steel	ASTM D1000	25 N/cm	32N/cm
Water Vapor Transmission Rate	ASTM E 96	0.03
Water absorption after 1 day,At+23℃	ASTM D570	0.07%
Volume Resistivity	ASTM D 257	2.0 x 1015 ohm.cm
Dielectric Strength	ASTM D149	30 kv	32kv
Max serve temperature		-20 to + 80℃
Color		Black or White

Pipe Joint Tape Structure and Specifications

Backing : Special blend of stabilized polyethylene

Adhesive : Butyl rubber and Adhesion Promoting Resins

Total tape thickness in mils:35mils(0.89mm),50mils(1.27mm)

Tape width in inches:2"(50mm),,4"(100mm),6"(150mm)

Tape roll length in feet:50ft(15M),100ft(30M)

Other Products Recommendation

Pvc Insulation Tape,Outer Anti-corrosion Tape,Polypropylene Anti-corrosion tape

Contact us if you need more details on Pipe Joint Tape Wrapping. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Joint Tape Wrapping、Pipe Wrapping Tape. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Pipe Anticorrosion Materials > Pipe Joint Wrapping Tape