Wear Pipeline for New Nippon Steel
Product Description
Wear Pipeline for New Nippon Steel
Wear Pipeline for New Nippon Steel, called cladding steel pipe sometimes. The bi-metal lined pipe combines the strength, corrosion resistance and wear resistance of the base pipe and the outer pipe. It not only satisfies the special requirements but also saves costs.
In a clad Line Pipe, the corrosion-resistant alloy forms a complete barrier layer on the internal surface of carbon or low-Alloy Steel Pipe (usually referred to as the "backing steel"). In general, use of clad or bi-metal-lined pipe allows the economic use of expensive CRA materials, It has been widely concerned and used in many other fields abroad.
In consideration of the variety of fluid flowing inside a wear pipeline for New Nippon Steel and the outside environment in which the pipe is used, it is necessary for a steel pipe maker to provide pipes and corrosion protection methods suitable for the condition. Nippon Steel has supplied virtually all the tubular products for water and gas services according to the standards of JIS and the Water Steel Pipe Association such as steel pipes with zinc plating, coating, vinyl chloride lining and polyethylene lining for ordinary piping, pressure service and water service. In this market sector, too, there are strong needs for environmental protection recently.
Wear Pipeline for New Nippon Steel have been used mainly in the form of pipe piles or steel pipe sheet piles, especially for civil construction. Nippon Steel has promoted process mechanization and laborsaving of spiral pipe manufacturing processes such as increase in seam welding speed by a new welding process that combines ERW with submerged arc welding and automatic welding of steel pipe sheet piles. Attention was paid to the material flow in secondary work processes, which are more complicated than the pipe forming process, and shortening of work periods and reduction of handling costs have been achieved through improvement of material handling and introduction of production control systems.
Wear pipeline for New Nippon Steel is applied in various fields of industry and manufactured through processes with wide variation complying with its application expanding. Following market requirement, pipe tends to be supplied as not only a simple material but also a pretreated product. We introduces the activities of Nippon Steel Pipe & Tube. Division on various products and technologies satisfying the industry up till now, and clarifies its future prospects.As a consequence, the production and sales of pipe products change in terms of quality and quantity depending on changes of energy-related markets.
On the manufacturer side, however, the following are required in order to cope with the above market requirements: product design technology to realize high strength, toughness, corrosion resistance and functionality; manufacturing technology to realize high efficiency and enhance product quality; and capability of proposing solutions in consideration of customers’ situations. Wear pipeline for New Nippon Steel has actively and flexibly responded to these requirements exercising its comprehensive technical capabilities covering from the production of material steel sheets/plates to pipe making and processing.
Our Company
Shenyang Hard Welding Surface Engineering Co., LTD is awear resistant sheet for cement high-tech enterprise specializing in processing and manufacturing chromium carbide overlay wear plate and metal base hardfacing materials. Relys on thedomestic institutes, has indepently R&D Chrome Carbide Overlay Wear Plate. At present, customers system solutions inMetallurgy\ lectric Power\ Mining\ Cement and otherindustry can be offered.
We not only offer chromium carbide overlay wear plates and wear materials,at the same time we has also focused on the refurbishment of Wear Resistant Parts, and we can offer the guidances of all kinds of problems and difficulties you may meet for industrial wear fields. we firmly believe that we must be able to Create more social value for industrial wear field by our constantly efforts and pursuits.
Shenyang Hard Welding Surface Engineoring Co.. Ltd. is a high-tech enterprise, which specializing inmanufacturing and processing metal cladding composite wear-resistant steel plate and wear resistant material. Relying on domestic famous insitutes, the company mainly engaged in research & development and manutacturing hard-laced wear-resistant steel plate independently and also provide integrated solutions for wear resistance system to all customers. The product of the company has passed the ISO international qudlity system authentication and the company has more than a dozen of its own technology. In 2007, the company was named high-tech enterprise; and recelved national innovation fund in 2010. Now the company bec omes the domestic well-known enterprise.
Our products are wldely usedin metallurgy, electric power, cement, minIng and other industries. In addition to the domestic market, products are exported to Canada, Australia, Madagascar, South Korea, India, Nigeria, the United Arab Emirates, Oman and other countries. The product quality has got good comments from the domestic and abroad customers. And the company was awarded“ 2009 outstandlng supller" by Samsung enterprise, South Korea.
FAQ
Q1: Why are there so many cracks?
A1. Due to the cooling rates of dissimilar metals, HARD PLATEhardfacing alloy plate alloy steel wear sheets boards on sale is manufactured using a welded process. This process results in high temperatures. During the cooling process, the plate goes through a stress relieving process. This is a natural process and does not effect the performance of the plate. The stress relief cracks should be between 3/4" - 2" apart. There are typically two methods used in situations when the hardfacing side is required to be on the outside of a tight radius resulting in cracks wider than desired. the cracks can be touched up using an appropriate hardfacing wire or electrode.
Q2: What is the best method of attachment?
A2. HARD PLATE hardfacing alloy plate alloy steel wear sheets boards on sale is usually attached by countersunk bolts, weld studs, perimeter welding, or plug welding. Some methods are better suited than Others depending on the specific application. For more detail on each method see the installation section.
Q3: Can this plate be drilled or machined?
A3. No. HARD PLATE hardfacing alloy plate alloy steel wear sheets boards on sale can not be machined or drilled. It can however be ground. Mild steel inserts are used to create countersunk or counter bored holes. HARD PLATE 6+3/8+3/8+5 wear resistant steel plate can be cut using plasma, Grinding wheel saw, or air-arc gouging.
Q4:MOQ? A4.Our product has no limit to quantity, it can be ordered according to customer requirement. Q5:What’s the service life compare with Hardox series? A5.Generally speaking, our bimetallic overlay wear plate is 4.5~8 times than Hardox series in service life.
Product Categories : Chromium Carbide Overlay Wear Resistant Pipes and Elbow > Bimetallic Overlay Wear Pipeline and Fittings