Find Alloy Seamless Pipe, Seamless Alloy Steel Tube, Seamless Alloy Pipe on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Alloy Seamless Pipe > Asme SA213 T11 Seamless Steel Tube for Boiler Pipe

Asme SA213 T11 Seamless Steel Tube for Boiler Pipe

Basic Info

Model No.:  IR-B steel pipe

Product Description

Model NO.: IR-B steel pipe Technique: Hot Rolled Surface Treatment: Bare Pipe Size: Above 30mm End Processing: Plain Ends Trademark: Iron&steel Origin: China Type: Seamless Material: Alloy Steel Section Shape: Round Length: Fixed Length, by Random Surface: Bare Pipe, Anti-Rust Painting Specification: ASTM A210 HS Code: 73045910 ASME SA213 T11 Seamless Steel Boiler Pipe
Standards:
GB3087 Chinese national standard
GB5310 Chinese national standard
ASME SA210 Boiler and pressure vessel code of ASME
ASME SA213 Boiler and pressure vessel code of ASME
DINl7175 Deutsches industrial standard~
Application:
Used as the pipes on the heated side of low and medium pressure boilers(normally with operating pressure not higher than 5.88Mpa and
operating temperature below 450 oc);as the pipes on the heated sides of high·pressure boilers,economizers,overheaters,reheaters and pipes
for petrochemical industry(with the operating pressure above 9.8Mpa and operating temperature ranging between 450~C~650~C1
Specifications of ma}or steel:
10,20,20G,20MnG,25MnG,15CrMoG,12Cr2MoG,12Cr1MoVG,12Cr2MoWVTiB,10Cr9Mo1VNb,SA210A1,SA210C,SA213 T11,SA213 T12,SA213 T22,SA213 T23,SA213 T91,SA213 T92,ST45.8/III,15Mo3,13CrMo44,10CrMo910etc.


Diamensional tolerances:
Types of steel tubes Outer diameters Wall thickness
Cold-rolled tubes Tube sizes(mm) Tolerances(mm) Tube sizes (mm) Tolerances(mm)
>30~50 ±0.3 >3~20 ±10%

 

Mechanical properties:
Standard codes Models of steel tubes Tensite strength(MPa) Yield strength(MPa) Elongation(%) Hardness
GB3087 10 335~475 ≥195 ≥24 /
20 410~550 ≥245 ≥20 /
GB5310 20G 410~550 ≥245 ≥24 /
20MnG ≥415 ≥240 ≥22 /
25MnG ≥485 ≥275 ≥20 /
15CrMoG 440~640 ≥235 ≥21 /
12Cr2MoG 450~600 ≥280 ≥20 /
12Cr1MoVG 470~640 ≥255 ≥21 /
12Cr2MoWVTiB 540~735 ≥345 ≥18 /
10Cr9Mo1VNb ≥585 ≥415 ≥20 /
ASME SA210 SA210A-1 ≥415 ≥255 ≥30 ≤143HB
SA210C ≥485 ≥275 ≥30 ≤179HB
ASME SA213 SA213 T11 ≥415 ≥205 ≥30 ≤163HB
SA213 T12 ≥415 ≥220 ≥30 ≤163HB
SA213 T22 ≥415 ≥205 ≥30 ≤163HB
SA213 T23 ≥510 ≥400 ≥20 ≤220HB
SA213 T91 ≥585 ≥415 ≥20 ≤250HB
SA213 T92 ≥620 ≥440 ≥20 ≤250HB
DIN17175 ST45.8/III 410~530 ≥255 ≥21 /
15Mo3 450~600 ≥270 ≥22 /
13CrMo44 440~590 ≥290 ≥22 /
10CrMo910 480~630 ≥280 ≥20 /

 

Chemical composition:
Standard codes Models of steel tubes Chemical compositions(%)
C Si Mn P S Cr Mo Cu Ni V Al W Ti Nb N
GB3087 10 0.07~0.13 0.17~0.37 0.38~0.65 ≤0.030 ≤0.030 0.3~0.65 / ≤0.25 ≤0.30 / /        
20 0.17~0.23 0.17~0.37 0.38~0.65 ≤0.030 ≤0.030 0.3~0.65 / ≤0.25 ≤0.30 / /        
GB5310 20G 0.17~0.24 0.17~0.37 0.35~0.65 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
20MnG 0.17~0.24 0.17~0.37 0.70~1.00 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
25MnG 0.18~0.24 0.17~0.37 0.80~1.10 ≤0.030 ≤0.030 ≤0.25 ≤0.15 ≤0.20 ≤0.25 ≤0.08          
15CrMo 0.12~0.18 0.17~0.37 0.40~0.70 ≤0.030 ≤0.030 0.80~1.10 0.40~0.55 ≤0.20 ≤0.30            
12Cr2MoG 0.08~0.15 ≤0.50 0.40~0.70 ≤0.030 ≤0.030 2.00~2.50 0.90~1.20 ≤0.20 ≤0.30            
12Cr1MoV 0.08~0.15 0.17~0.37 0.40~0.70 ≤0.030 ≤0.030 0.90~1.20 0.25~0.35 ≤0.20 ≤0.30 0.15~0.30          
12Cr2MoWVTiB 0.08~0.15 0.45~0.75 0.45~0.65 ≤0.030 ≤0.030 1.60~2.10 0.50~0.65 ≤0.20 ≤0.30 0.28~0.42   0.30~0.55 0.08~0.15 B 0.002~0.008  
10Cr9Mo1VNb 0.08~0.12 0.20~0.50 0.30~0.60 ≤0.020 ≤0.010 8.00~9.50 0.85~1.05 ≤0.20 ≤0.40 0.18~0.25 ≤0.015     0.06~0.10 0.03~0.07
ASME SA210 SA210A-1 0.13~0.19 ≥0.1 0.45~0.65 ≤0.030 ≤0.030                    
SA210C 0.18~0.24 ≥0.1 0.80~1.10 ≤0.030 ≤0.030                    
ASME SA213 SA213 T11 0.05~0.15 0.50~1.0 0.30~0.60 ≤0.030 ≤0.030 1.00~1.50 0.50~1.00                
SA213 T12 0.05~0.15 ≤0.50 0.30~0.61 ≤0.030 ≤0.030 0.80~1.25 0.44~0.65                
SA213 T22 0.05~0.15 ≤0.50 0.30~0.60 ≤0.030 ≤0.010 1.90~2.60 0.87~1.13                
SA213 T23 0.04~0.10 ≤0.50 0.10~0.60 ≤0.030 ≤0.030 1.90~2.60 0.05~0.30       ≤0.030 1.45~1.75 B0.0005~0.006 0.02~0.08 ≤0.040
SA213 T91 0.08~0.12 0.20~0.50 0.30~0.60 ≤0.020 ≤0.010 8.00~9.50 0.85~1.05   ≤0.40 0.18~0.25 ≤0.015     0.06~0.10 0.03~0.07
SA213 T92 0.07~0.13 ≤0.50 0.30~0.60 ≤0.020 ≤0.010 8.50~9.50 0.30~0.60   ≤0.40 0.15~0.25 ≤0.015 1.50~2.00 B 0.001~0.006 0.04~0.09 0.03~0.07
DIN 17175 ST45.8/III ≤0.21 0.10~0.35 0.40~1.20 ≤0.040 ≤0.040                    
15Mo3 0.12~0.20 0.10~0.35 0.40~0.80 ≤0.035 ≤0.035   0.25~0.35                
13CrMo44 0.10~0.18 0.10~0.35 0.40~0.70 ≤0.035 ≤0.035 0.70~1.10 0.45~0.65                
10CrMo910                              

 
 

Contact us if you need more details on Seamless Steel Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Seamless Steel Tube、Boiler Pipe. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Alloy Seamless Pipe

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters